48mm Screen Masking Tape | High Tac Adhesive | Extra Long 75M Roll | Attach Mesh to frames
High Adhesion/ Low stretch for securing to frames.
NEHOCSKU: T48
Wider coverage with our 48mm Screen Masking Tape for extra adhesion when taping mesh to frames - extra bond area over 24mm tapes.
Extra long 75 Metre length (most other tapes are only 50M), providing great value and more uses from a single roll.
Always leave a 3mm gap between tape and design, as the raised edge from the tape may cause ink bleed when printing.
A high tac adhesive using rubber glue (not acrylic or solvent) for instant grip.
Mounting MiScreen & RISO Mesh to Frames
Firstly mount MiScreen Mesh using double sided tape. Once secure, use Screen Masking Tape to cover all edges to the frame.
The wider 36mm wraps right over the frame area providing a higher bond that 24mm. This provides additional strength and stops the MiScreen mesh from moving on the double sided tape.
Blocking Design Areas
Masking off the whoel screen area except the design? This wider tape blocks large areas of the film/ mesh where pinholes or registration marks have been used.
Remember to maintain a 3mm distance from any design areas, as the raised edge from the tape may cause ink to bleed on the edge of the design area.
Multi-colour Printing
When printing multiple colours the non-absorbent Screen Masking Tape will assist to reduce ink from previous colours lifting off the fabric and marking the mesh.
This maintains the maximum volume of ink on your materials not the back of screens.
Width: 48mm
Length: 75 Metres
Natural rubber based adhesive for instant grip, consistent results without splitting or stretching.
| SKU | T48 |
| Barcode # | 9334315000105 |
| Brand | NEHOC |
| Shipping Weight | 0.1400kg |
| Shipping Width | 0.100m |
| Shipping Height | 0.048m |
| Shipping Length | 0.100m |
| Shipping Cubic | 0.000480000m3 |
| Unit Of Measure | ea |
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law (ACL). You are entitled to a replacement or refund for a major failure. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Should you receive a product that does not meet your expectations, you may return it for a refund or exchange - prior to opening or using the product.
Where products have been opened or used, suitability of usage has been determined and no refund is available for change of mind purchases on used products. This does not exclude warranty claims where product may be faulty or contain a manufacturing fault. Further support available in the Warranty Support section of this website.
