Timer for Inkart and EZIscreen Film Exposures | Attach with Clip/ Stand/ Magnet | Countdown + Stop Watch | Easy to use and reset | Small and compact
Iknoart & EZIscreen film exposures under UV lamp.
EZIscreenSKU: EZI-TIMER
Digital Timer is small and compact to ensure your film exposure times don't run too long, with a clip for easy mounting directly to the corner of your exposure lamp.
- Large easy to read LCD display (30x10mm).
- Only 3 buttons make this simple to use, set and reset.
- 3 attachment methods - Magnetic holder, built in stand or pocket clip.
- Auto alarm when countdown timer is reached
- Countdown timer and stopwatch functions in the one unit.
- Up to 99 minutes 59 seconds.
Why not just use a phone?
Of course you can if you wish, however exposing your Iknoart or EZIscreen Film is a hands on process requiring both hands at several points. The timer is magnet, or most commonly is clipped onto your exposure frame ready to go when you expose it to sunlight.
Often the phone screen isn't easy to read (especially if backlight is set to auto or too low), however the main problems with using a phone is the extra time to pull out of your pocket, unlock the screen, open the app and set the timer - this may affect the exposure result if you started before the timer. Overexposure of the film will result in reduced quality and possible fine lines filling in.
Again, yes you can use your phone as a replacement, however this inexpensive timer has proven itself a better option for the hands on exposure process and isn't as expensive to repair/ replace as a phone screen if you drop it!
Usage
View the EZI-TIMER Instruction Sheet
Remove plastic battery protector before use, by pulling the tab out of the unit, or opening the battery compartment and removing the protective tab.
Countdown
Set timer to 0:00 by pressing Minute and Second has together.
Press Minute and Second buttons to reach the desired countdown time, then press Start/ Stop button when ready to begin countdown.
Start/Stop button will pause countdown and pressing again will recommence the countdown timer.
Stopwatch
Timer must be at 0:00 to operate in stopwatch mode. Reset timer by pressing Minute and Second has together.
Press Start/ Stop button to activate stopwatch timer function, press Start/Stop to stop operation.
Fast Scan Numbers
Hold the Minute or Second hand will increase the number faster and allow you to reach higher number very quickly, instead of pressing the button for each increase.
Cleaning
Keep timer dry at all times, never immerse or soak in water.
Clean screen with soft cloth only. Use damp soapy water to clean screen only when required.
Storage
Remove battery from unit when not in use. Store with your film and accessories in the EZIscreen Opaque Storage Container for easy use next time.
Do not store or place digital display in sunlight. Do not expose to heat. See instruction sheet for full details.
- Large easy to read LCD display (30x10mm).
- Only 3 buttons make this simple to use, set and reset.
- 3 attachment methods - Magnetic holder, built in stand or pocket clip.
- Auto alarm when countdown timer is reached
- Countdown timer and stopwatch functions in the one unit.
- Up to 99 minutes 59 second
| SKU | EZI-TIMER |
| Barcode # | 9334315037156 |
| Brand | EZIscreen |
| Shipping Weight | 0.0500kg |
| Shipping Width | 0.070m |
| Shipping Height | 0.030m |
| Shipping Length | 0.070m |
| Shipping Cubic | 0.000147000m3 |
| Unit Of Measure | Pack |
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law (ACL). You are entitled to a replacement or refund for a major failure. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Should you receive a product that does not meet your expectations, you may immediately return it for a refund or exchange - prior to opening or using the product.
Where products have been opened or used, suitability of usage has been determined and no refund is available for change of mind purchases on used products. This does not exclude warranty claims where product may be faulty or contain a manufacturing fault.
