Ikonart UV Exposure Textile Films

Use your designs to create custom stencils and print freehand using this adhesive backed stencil film, little equipment is required to begin with high quality fine detailed results. (
NB: Blue Stencil Film pictured below, Textile Film is purple in colour.)

Easy Artwork Creation	Fast UV Exposure	Simple Washout	High Quality Results

- Use your designs and artwork, quickly and easily printed onto Artwork Transparencies (or hand drawn).
- No chemicals or diazo mixings, no coating emulsions onto a screen, plus no storing the mix (or disposing of the chemicals) after use.
- No time consuming hand cuttings of films, that provide low quality results with no fine lines or graphics and bridges to lettering (army lettering)
- Fast exposure using a UV-A wavelength matched to the films emulsion.
- Fast washout using low pressure household laundry/kitchen sprays (optional TriggerJet available).

Ikonart Film Replaces StencilPro

Manufactured to the highest industry standard in the USA, Iknoart films replace the older generation SPO and StencilPro film with all new features and benefits:
- New improved trademarked photosensitive emulsion pre-coated evenly across the mesh.
- New coating keeps the mesh tight and straight
- Increase in film shelf life. Up to 18 months best before (film still does not expire at that time).

Usage Guide

Exposing your Ikonart Stencil Film works by using artwork to block the UV light, hardening the areas of the film that aren't blocked, and leaving the areas that are blocked water-soluble. Therefore, anything that will block the light from hardening the film can be used as "artwork".

First place to start is the Quick Start Booklet.

If your a visual learner, there's a range of videos online, or go straight to the Exposure Cheat Sheet.

Ikonart Films are precoated with a UV emulsion which hardens when the correct wavelength of UV-A light is projected.
Our UV Exposure Lamp is available separately and matched to the film's emulsion with the recommended exposure distances and times.

Use High Density Artwork

It is recommended Artwork Transparencies be used for all Ikonart Film exposures.
Do not use papers that will block the UV.

When you print your artwork, it is important that the black areas can block ultra-violet light and are 'high density'.

Toner that looks dense may actually be closer to translucent in its ability to block UV light. A simple test: hold the artwork up to a light source (sunny window, lamp, etc.). If you can see any light through the black areas, the artwork is not dense enough and will not produce a good stencil.

For an example of high density, hold a piece of black construction paper up to a light source. No light will bleed through. This is the density your artwork should provide.

Watch the Artwork Video in the Ikonart Recources section now.

Stencil and Textile - what is the difference?

Stencil Films have an adhesive backing applied so they attach/ adhere directly to items for direct printing applications using a squeegee/ brush/ sponge/ spray - example, cardboard cartons, wood, canvas artwork.

Using Stencil Film onto t-shirts and fabrics, the adhesive will adhere to the fibres and which may lead to fibres lifting and blocking fine areas of the back of the stencil for printing. The more the fibres in the material the faster blocking may occur, for this reason we recommend for t-shirts and fabrics using the non-adhesive Textile Film.

Textile Film without an adhesive may be used freehand by simply taping to an item similar to a stencil, or more traditionally is mounted to a frame using double sided tape/ masking tape which provides a higher tension for screen printing
- Mounting to a frame is required for printing supercover fabric inks, as they must be printed off contact.
- Mounting helps eliminate movement/ blurring/ smudging when printing.

When printing multiple items, repeat designs, using a jig or multi-coloured, mounting to a frame makes printing faster and more accurate.

Difference between Ikonart and EZIscreen films

Size. Ikonart are standard US 10x12", EZIscreen are custom 8.5x10" to match the previous SPO series of frames and accessories for existing customers.

SPO/StencilPro Film - what happened?
'StencilPro Orange' was an evolution of the original 'StencilPro Red', however the manufacturing company (Circuit Bridge LLC, USA) ceased trading in 2020 when the owner passed away suddenly, with all product immediately discontinued. Read the StencilPro Product Statement.

Watch More How To Videos

Loads more videos are online in the Ikonart Resources page - details click here . .

Shipping Notice - No Free Options

Screen Printing Shop is an authorised distributor of IkonArt products. Our goal is to keep costs low and on par with buying within the USA. As you can calculate with the exchange rate & shipping costs added, this product is supplied at a heavily discounted cost. When added to your cart, no free delivery options will be available.
- If you qualified for a free delivery option with other items in your cart, we suggest splitting your order into two parts. Orders can not be split after submitting.

To calculate shipping costs, use the shipping calculator on the product page, or add items to cart, view the cart and enter your post code to display available options.
- If an option does not appear, create a Quote and contact us for a shipping cost.