MiScreen Main Control PCB | Genuine RISO OEM Replacement | Requires Firmware Coding to TPH
Can not self install, requires firmware coding.
RISOSKU: R-MS1-PCB
4 Stock Left!
Spare Part: MiScreen Main Control PCB
Genuine Main PCB for MiScreen system from RISO. Entire PCB is replaced inside the base of the machine, wired up into sensors, morot, TPH and pherifirals, and then the new firmware is re-coded to the existing TPH resistance value of the specific machine.
PCB failure isn't normal, think there's a fault?
Best thing to do first is contact NEHOC Australia Technical Support (see details on bottom of your MiScreen) and ask advice, as the PCB unit may be covered by warranty if there's a manufacturing fault.
Installing the part.
Each Control PCB firmware MUST be re-coded to the individual resistance value of your MiScreen's TPH assembly.
This can not be done remotely as it required specialised software.
Only a qualified service technician can perform the firmware re-coding for this spare part to ensure correct operation and maintain the new PCB product warranty.
Price includes the firmware coding and return shipping.
You'll need to ship us your MiScreen machine, we will replace the Main PCB and re-code the firmware to match the TPH value, then ship your MiScreen back to you.
Note: This product is supplied at a heavily reduced cost and does not qualify for any further discounts, or free delivery options.
Product Dimensions (LWH): 17 x 7 x 2cm
Product Weight: 110g
Pack Dimensions: 44 x 12 x 18
- includes MiSceen return shipping.
Pack Weight: Approx. 3.2Kg
| SKU | R-MS1-PCB |
| Model # | MFPN: 116-75003-000 |
| Barcode # | 9334315030805 |
| Brand | RISO |
| Artist / Author | Genuine RISO Kagaku Spare Part. |
| Shipping Weight | 3.2000kg |
| Shipping Width | 0.440m |
| Shipping Height | 0.180m |
| Shipping Length | 0.120m |
| Shipping Cubic | 0.009504000m3 |
| Unit Of Measure | ea |
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law (ACL). You are entitled to a replacement or refund for a major failure. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Should you receive a product that does not meet your expectations, you may return it for a refund or exchange - prior to opening or using the product.
Where products have been opened or used, suitability of usage has been determined and no refund is available for change of mind purchases on used products. This does not exclude warranty claims where product may be faulty or contain a manufacturing fault.
Something not right with your Frame? Visit the Warranty Support section.
