MiScreen TPH (Thermal Print Head) Assembly | Genuine RISO OEM Replacement | Requires PCB Firmware Coding
Can not self install, requires firmware coding.
RISOSKU: R-MS1-TPH
4 Stock Left!
Spare Part: MiScreen TPH (Thermal Print Head) Assembly
Genuine TPH assembly for MiScreen system from RISO. Entire TPH unit is replaced inside the Head Cover of the machine, wired up into the Main Control PCB and then the PCB firmware is re-coded from the old to the new TPH resistance value.
On no did you damage or scratch the TPH unit pulling a frame out forwards??
Accidents can happen when students don't follow instructions and remove the frame in the wrong direction.
Think there's a TPH fault?
Best thing to do first is contact NEHOC Australia Technical Support (see details on bottom of your MiScreen) and ask advice, as the TPH unit may be covered by warranty if there's a manufacturing fault.
Installing the part.
Each TPH unit has an individual resistance value which MUST be coded to the firmware of your MiScreen's control software.
This can not be done remotely as it required specialised software.
Only a qualified service technician can perform the firmware upgrade to the PCB for this spare part to ensure correct operation and maintain the new TPH product warranty.
Price includes the firmware coding and return shipping.
You'll need to ship us your MiScreen machine, we will replace the TPH and re-code the firmware to match the new TPH value, then ship your MiScreen back to you.
Note: This product is supplied at a heavily reduced cost and does not qualify for any further discounts, or free delivery options.
Product Dimensions (LWH): 34 x 7 x 3cm
Product Weight: 420g
Pack Dimensions: 44 x 12 x 18
- includes MiSceen return shipping.
Pack Weight: Approx. 3.2Kg
| SKU | R-MS1-TPH |
| Model # | MFPN: 116-75007-006 |
| Barcode # | 9334315031086 |
| Brand | RISO |
| Artist / Author | Genuine RISO Kagaku Spare Part. |
| Shipping Weight | 3.2000kg |
| Shipping Width | 0.440m |
| Shipping Height | 0.180m |
| Shipping Length | 0.120m |
| Shipping Cubic | 0.009504000m3 |
| Unit Of Measure | ea |
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law (ACL). You are entitled to a replacement or refund for a major failure. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Should you receive a product that does not meet your expectations, you may return it for a refund or exchange - prior to opening or using the product.
Where products have been opened or used, suitability of usage has been determined and no refund is available for change of mind purchases on used products. This does not exclude warranty claims where product may be faulty or contain a manufacturing fault.
Something not right with your Frame? Visit the Warranty Support section.
![Orange/Charcoal HI Vis Traditional Polo | Non-Cuff | Classic Fit | Industry Workwear [Clothing Size: 2X-Small]](/assets/thumb/C-6HVNC-ORANGECHARCOAL.jpg?20210711131553)
