Budget carriers are constructed using two layers of polycarbonate plastic, bound using high temperature Kapton tape.
This carrier provides a higher resolution than teflon carriers, however has a shorter life span as the polycarbonate plastic scratches and marks more readily.

- Poly carbonate construction provides high quality images
- High temperature Kapton tape header tape
- Cut header corners to avoid jamming
- Reversible - both sides can be used
- Protective storage cover

Problems with homemade carriers

Patchy results, faint edges, graining, blurring, jamms and melting . . .there's a long list of problems we hear all the time.

It's not the light tattoo copiers use to make a spirit stencil - it's a high frequency IR reacting with the carbon in the design, so if your plastic absorbs the IR wavelengths you get poor results.

Pictured right is a home made carrier taped together with faint edges - caused by the plastic absorbing the IR, the further from the middle the fainter the IR and it's not evenly absorbed.

Teflon Carriers are tested

The high grade FEP100 Teflon allows the IR to pass through onto your spirit paper, time and time again, giving years of use from a single carrier.

Solid designs, fine lines and consistent copies is what your after and what a NEHOC Teflon Carrier will provide.

Don't piece together 2 pieces of plastic at home, it may be cheaper, but that's not how thermal-copiers work and you will receive poor quality results and waste both your artwork and the spirit paper.

Worse still, you may stick/ jam the carrier onto the glass roller with tape that isn't heat resistant (and melts) causing serious damage to the machine.

Teflon carriers use high temperature rated Kapton Tape that will not melt, even if the carrier gets stuck.

Note: A4 Thermal-Copier Machine is for illustration/ application/ usage purpose only and not included or part of this sale.