UV Exposure Lamp Ikonart & EZIscreen Films | AU Plug | Warranty | Certified AS/NZS 3760:2022
Correct UV-A wavelength for Inknoart & EZIscreen films.
EZIscreenSKU: E-EXP
Controlled exposures - UV matched to emulsion
Expose your designs onto both Ikonart and EZIscreen Films (Stencil and Textile) using a low wattage LED lamp held above the design.
Using a UV-A wavelength matched to the films emulsion, exposures are simple and fast.
It's important to note using an incorrect wavelength or wattage lamp will change exposure times requiring testing before use.
Australian tested and certified to AU/NZ 3760:2022
Unlike US/ UK/ China Lamp imports that require a plug adapter/converter, our U.V. Exposure Lamp is Australian PAT tested and certified with an Australian compliant hard wired (eartherd) plug.
- Long cord with in built on/off switch.
- Australian plug - no US/ UK converters or adapters needed.
- 230V/ 10A Type I 3 Pin Earth Grounded.
- PAT Tested to AU/NZS 3760:2022 with Australian certification.
The small extra you pay over 110V/ imported ebay, Aliexpress or Amazon is for the Australian electrical safety testing, plus local stock and fast delivery - backed with a 100% Australian warranty.
UV Film Exposure Guide
Both Ikonart and EZIscreen Films are coated with a UV emulsion that hardens when the correct wavelength of UV is supplied, as this lamp is designed specifically to do.
There's a range of videos online, download the Quick Start Booklet or the Exposure Cheat Sheet.
What's the difference between Ikonart and EZIscreen films??
Size, that's all. Ikonart are US 10x12", EZIscreen are 8.5x10" to match the previous SPO series of films, frames and accessories.
|
|
||
Ikonart 101: Setting Up The Exposure StandThe first thing to do after you receive your kit is to get the stand setup. It's super easy and this video takes you through it step-by-step. |
||
|
|
||
Ikonart 101: Make Your First StencilEvery kit has an artwork sample in it and we recommend making a small stencil using that artwork to get started. That way you can see the magic happen right away! |
||
More Videos
Visit the Ikonart Resources Page for more videos and usage information.
Making or converting your own?
Remember, a licensed electrician should always be used for all wiring of equipment, never do it yourself.
When purchasing a US model, remember it's designed for 110V with a US Plug and no grounding wires - this equipment needs to be grounded for class 1 certification and professionally wired.
Using the correct wavelength is critical to obtain the required exposure times and distances. Variations away from the correct wavelength will require separate testing for which support is not available using imported, unsupported or homemade products.
Powerful 30W LED UV Lamp
- Instant on for faster exposures.
- No replacement bulbs with long lasting LED’s.
- 395nm UVA wavelength.
- Energy efficient/ low heat output.
Australian Plug with PAT Certification
- No US/UK/110V adapter required.
- Built in on/off switch for easy use.
- Tested to AS/NZS 3760:2022.
- PAT label applied for certification.
Mounting Bracket
- Built in rear mounting bracket.
- Large swivel for easy installation.
- Mount on a hook, wall or custom mount.
Attachment accessories not included.
Information on the is product is intended to be used as a guide only and does not form usage or operational instructions (included with product purchases). ScreenPrintingShop.com.au may not be held responsible for any fault or misinterpretation that may occur from its use by the customer. ScreenPrintingShop.com.au does not accept any liability from incorrect assembly, or usage, by the customer. Specifications correct at time of publication and subject to change without notice. All rights reserved.
Contents
Type: LED Ultra Violet Lamp with adjustable bracket.
Wattage: 30W
Voltage: 230V
Plug Type: 240V, 10A
- Type I Australian 3 Pin Earth Grounded
- PAT Tested to AU/NZS 3760:2022 with certification label attached.
Includes Product Users Manual.
Note: Lamp only, does not include stand or attachments.
| SKU | E-EXP |
| Barcode # | 9334315037224 |
| Brand | EZIscreen |
| Shipping Weight | 0.5400kg |
| Shipping Width | 0.170m |
| Shipping Height | 0.050m |
| Shipping Length | 0.180m |
| Shipping Cubic | 0.001530000m3 |
| Unit Of Measure | Pack |
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law (ACL). You are entitled to a replacement or refund for a major failure. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Should you receive a product that does not meet your expectations, you may immediately return it for a refund or exchange - prior to opening or using the product.
Where products have been opened or used, suitability of usage has been determined and no refund is available for change of mind purchases on used products. This does not exclude warranty claims where product may be faulty or contain a manufacturing fault.
